Spark Erosion

All our spark erosion machines are Swiss made Charmilles Technologies machines.  Most of our spark erosion machines are calibrated to NADCAP which allows us to manufacture highly critical, tight tolerance components to the aerospace industry.

FORM 300
Spark Erosion Capacity
2 x Agie Charmilles Form 300
1 x Agie Charmilles Form 30
1 x Agie Charmilles Form 40
1 x Charmilles Roboform 31
3 x Charmilles Roboform 200
2 x Charmilles Roboform 400
Maximum Component Size 1100X 780Y 370Z. Max weight 800kg

Why EDM?

  • Complex shapes that would otherwise be difficult to produce with conventional cutting tools
  • Extremely hard material to very close tolerances
  • Very small work pieces where conventional cutting tools may damage the part from excess cutting tool pressure.
  • There is no direct contact between tool and work piece. Therefore delicate sections and weak materials can be machined without any distortion.
  • A good surface finish can be obtained.
  • Very fine holes can be easily drilled.

Comments are closed.